1. Select all the sources you need
On the recording bar, select the playback device carrying the computer audio and the microphone inputs you want to capture. The list is based on available Windows audio devices; it is not limited to a fixed speakers-and-mic pair.
Set each input’s gain while watching its level. A quiet microphone can be raised independently of a loud computer source. Use headphones to reduce sound from the speakers leaking into the microphones.
2. Record the same take
Press Record. The selected sources record at the same time, with a separate recording for each source. Use the count-in, Pause and Resume controls when useful.
Press Stop to finish. The recordings are loaded into the multitrack editor, one track per source. There is no need to choose a mixed-versus-separate recording switch before the take.
3. Balance one track at a time
Use track volume to bring your voice forward or lower a background source. Mute removes a track from the current mix; Solo lets you listen to the track you are checking. Trim or edit the relevant clip before exporting.
Make a short playback check with all the tracks you intend to include. Separate devices have their own hardware clocks, so check alignment on longer takes rather than assuming studio hardware synchronization.
A mixed file and an editable session do different jobs
| What you need | What to save |
|---|---|
| One finished file to listen to or share | Export the current mix as MP3, WAV or FLAC. |
| Separate tracks to reopen and edit | Save an .amss session. |
| A separate audio file for one source | Solo that track and export it; repeat as needed. |
MP3, WAV and FLAC export the mix. They are not a multitrack project file, and there is no one-click batch-stems export in this workflow.